 | DeWalt DDSCL2 18V Heavy-duty Cordless 4-Tool Combo Kit, 0-450/0-1500 RPM
The DeWalt DDSCL2 is an 18V Heavy-duty Cordless 4-Tool Combo Kit. The kit includes DC550 heavy-duty 18V cordless cut-out tool which has tool free bit change for fast and easy bit changing without a wrench. Dust sealed switch provides durability and long switch life. DC759 heavy-duty 1/2 inch (13 mm) 18V cordless compact drill/driver has compact size and fits into the tightest conditions. Its lightweight design (5.2 lbs) minimizes user fatigue. High performance motor delivers maximum power of 380 unit watts out. It has dual speed range of 0-450 / 0-1500 RPM delivers optimal performance. DW936 heavy-duty 5-3/8 inch (136 mm) 18V cordless trim saw also has lightweight & compact design allows for use in confined work areas. Its 5-3/8 inch (136 mm) blade can cut a 2x4 in one pass. 50° bevel provides additional capacity for specialty applications. DeWalt built high performance motor with fan cooling delivers maximum power and durability. Rip fence adds accuracy and consistency to the cut line. DW908 heavy-duty 18V cordless pivoting head flashlight has wide angle beam which maximizes light over a specific work area. Pivoting head rotates 90° which allows light to be projected in any direction. Extra-bright xenon bulb maximizes brightness of the beam. It is lightweight, compact design which makes the flashlight durable and portable.
Category : Cordless Tools
Click here for price |
 | DeWalt DW9099 Factory Reconditioned 18V XR Battery
The DeWalt DW9099 is a Factory Reconditioned 18V XR Battery. The high capacity XRP battery has 40% more run-time than standard batteries. It powers entire DeWalt line of 18V tools allowing users to run multiple tools off of the same battery pack.
Category : Cordless Tools
Click here for price |
 | DeWalt DW3710H-5 4" 10 TPI U-Shank Wood Cutting HCS Jig Saw Blade (5 Pack)
The DeWalt DW3710H-5 is a pack of 5, 4" 10 TPI U-Shank Wood Cutting HCS Jigsaw Blades. These "U" shank high performance wood cutting (HCS) blades have reinforced tooth design protects the teeth from damage and stays sharper longer. The side chip path helps to quickly remove debris and clear the channel for cleaner and smoother cuts.
Category : Power Tools
Click here for price |
 | DeWalt DW1922B 11/32" 6-Pc Pilot Point Drill Bit Set
The DeWalt DW1922B is a set of 6 11/32" Pilot Point Drill Bits. These drill bits are designed to solve the common problems professionals encounter when drilling with portable drills into metal, wood and plastic. The patented pilot point tip prevents the bit form walking across the work piece while providing a clean and round hole. The no spin shank eliminates the frustration of bit spinning in the chucks.
Category : Power Tools
Click here for price |
 | DeWalt DW1915B 15/64" 12-Pc Pilot Point Drill Bit Set
The DeWalt DW1915B is a set of 12 15/64" Pilot Point Drill Bits. These drill bits are designed to solve the common problems professionals encounter when drilling with portable drills into metal, wood and plastic. The patented pilot point tip prevents the bit form walking across the work piece while providing a clean and round hole. The no spin shank eliminates the frustration of bit spinning in the chucks.
Category : Power Tools
Click here for price |
 | DeWalt D180014 7/8" Bi-Metal Hole Saw
The DeWalt D180014 is a 7/8" Bi-Metal Hole Saw. It has double tooth design which strengthens each tooth for longer life and improved durability. The sharper tooth geometry cuts material faster for faster drilling. The performance of saw is enhanced in metal cutting applications by a unique tooth design and set pattern. The thick, hardened backing plates prevent warping at holes and increases cycles. DeWalt has increased the size of the bi-metal portion of the holesaw and uses M3 steel to not only increase wear resistance but also produce faster cuts. The deep-cut style increases the versatility by allowing a wider range of thicknesses of material to be cut.
Category : Power Tools
Click here for price |
 | DeWalt DW4916 4" Carbon Steel Knotted Cup Brush
The DeWalt DW4916 is a 4" Carbon Steel Knotted Cup Brush. The carbon steel wire brush is manufactured using highly specified wire grades and is constructed for perfect balance. Every wheel brush is properly inspected to ensure that each of them meets the prescribed quality standard and one of the highest wire content counts in the industry. The bench grinder wheel brush is available in crimped wire for lighter duty applications such as deburring, weld cleaning, rust removal and surface preparation.
Category : Power Tools
Click here for price |
 | DeWalt DW4802B 6" 6 TPI Taper Back Bi-Metal Reciprocating Saw Blade
The DeWalt DW4802B is a Reciprocating Saw Blades which are 6" long and has 6 teeth per inch. These straight back bi-metal reciprocating saw blades have reinforced tooth for increased durability when cutting through nails and other foreign objects. The raker tooth design increases the tooth contact area for faster cuts.
Category : Power Tools
Click here for price |
| DeWalt DW1907B 7/64" 12-Pc Split Point Drill Bit Set
The DeWalt DW1907B is a set of 12 7/64" Split Point Drill Bits. These drill bits are designed to solve the common problems professionals encounter when drilling with portable drills into metal and wood. The patented pilot point tip prevents the bit form walking across the work piece while providing a clean and round hole. The no spin shank eliminates the frustration of bit spinning in the chucks.
Category : Power Tools
Click here for price |
 | DeWalt DW1925B 25/64" 6-Pc Pilot Point Drill Bit Set
The DeWalt DW1925B is a set of 6 25/64" Pilot Point Drill Bits. These drill bits are designed to solve the common problems professionals encounter when drilling with portable drills into metal, wood and plastic. The patented pilot point tip prevents the bit form walking across the work piece while providing a clean and round hole. The no spin shank eliminates the frustration of bit spinning in the chucks.
Category : Power Tools
Click here for price |
