|
|
woodworking
home>ToolKing>Automotive>Servicing Tools Parts>Engine Oil>
::
Automotive Servicing Tools Parts Engine Oil ::
|
| 
|
|
|
|
 | Cal-Van 360 Engine Cylinder Hone For 2" to 7" diameter cylinder bores of cars, trucks, tractors, buses, industrial engines, and small air cooled engines Adjustable to infinite diameters throughout the range Flexible shaft, controlled spring action Equipped with 4" medium grit stones Operated by high or low speed electric drills. Use with cutting oil for best results. Manufacturer : Cal-Van Click here for price |  | Cal-Van 641 Piston Ring Compressor Set Installs piston rings from 2-7/8" to 4-3/8" (73 to 111 mm) diameter Works both vertically or horizontally Set includes fine tooth ratcheting pliers for accurate compression and 6 interchangeable bands Manufacturer : Cal-Van Click here for price |  | Husqvarna 610000014 1 quart Bar and Chain Oil The Husqvarna 610000014 is a 1 Quart Bar and Chain Oil Bottle. This premium bar and chain oil optimizes saw's cutting performance by reducing heat and friction. It is a premium blend of base stocks and tackifier additives which reduces high speed throw-off. Extends bar, chain and sprocket life by protecting against wear. It uses special tacking agents to keep oil on the bar and chain even at high RPM. The Pro Forest bar and chain oil is made from a 78% base of sunflower seed oil. Manufacturer : Husqvarna Click here for price |  | Husqvarna 610000130 2.6 oz XP Professional Performance 2-Cycle Oil Lubricant The Husqvarna 610000130 is a 2.6 oz. XP Professional Performance 2-Cycle Oil Lubricant for 1 Gallon Mix. It is a synthetic blend designed for tough, professional usage. It handles high loads at tough professional usage It has excellent lubricating properties and it lowers the engine's operating temperature. Manufacturer : Husqvarna Click here for price |  | Husqvarna 610000131 6.4 oz XP Professional Performance 2-Cycle Oil Lubricant The Husqvarna 610000131 is a 6.4 oz. XP professional performance 2-cycle oil lubricant for 2.5 gallon mix. It is a synthetic blend designed for tough, professional usage. It handles high loads at tough professional usage It has excellent lubricating properties and it lowers the engine operating temperature. Manufacturer : Husqvarna Click here for price |  | Husqvarna 610000132 12.8 oz XP Professional Performance 2-Cycle Oil Lubricant The Husqvarna 610000132 is a 12.8 oz XP Professional Performance 2-Cycle Oil Lubricant for 5 Gallon Mix. It is a synthetic blend designed for tough, professional usage. It handles high loads at tough professional usage It has excellent lubricating properties and it lowers engine operating temperature. Manufacturer : Husqvarna Click here for price |  | Husqvarna 610000133 1 Gallon XP Professional Performance 2-Cycle Oil Lubricant The Husqvarna 610000133 is a 1 Gallon XP Professional Performance 2-Cycle Oil Lubricant. It is a synthetic blend designed for tough, professional usage. It handles high loads at tough professional usage It has excellent lubricating properties and it lowers engine operating temperature. Manufacturer : Husqvarna Click here for price |  | K-D Tools 3704 45? Hog Ring Pliers The K-D Tools KD 492 is a Oil-Seal Remover and Installer. This oil seal remover and installer removes and installs upper rear main oil seals with engine and crank-shaft in place. It works on both wick and neoprene type seals. Manufacturer : K-D Tools Click here for price |  | OTC 4603 Stinger Freeze Plug Remover/Installer Set The OTC 4603 is a Stinger Freeze Plug Remover/Installer Set. The OTC 4603 is designed to remove and install frost plugs used in liquid-cooled gas and diesel engines found in automobiles, trucks, SUVs, agricultural equipment and construction equipment. Simply use a hammer with the driver and appropriate disc to install frost plugs ranging from 1" to 2-3/8" in diameter. Manufacturer : OTC Division of SPX Corp Click here for price |  | OTC 6005 Diesel Glow Plug Remover The OTC 6005 is a Diesel Glow Plug Removal Tool Set. The set used to removes damaged, stuck-in glow plugs from diesel engines without having to remove the cylinder head. It has 10 mm split nut which works on Ford 6.9L and 7.3L diesels, GM 5.7L, 6.2L and 6.5L diesels and various diesels in import vehicles. The 12 mm split nut works on various diesels in import vehicles, plus many agricultural and construction diesel applications. Manufacturer : OTC Division of SPX Corp Click here for price |
Next
|
woodworking
home>ToolKing>Automotive>Servicing Tools Parts>Engine Oil>
Don't
forget to bookmark woodworking-heaven!
Engine Oil
|
|